After the car film, the film master will recommend that you first dry it in the sun after pasting, and then go to drive, open the window, etc., after two or three days, so why do you want to operate it like this, today Xiaobian will give you an analysis to take a look?
In order to make the film and glass more bonded, although the scraper method will be used to remove water during construction, the water scraped out can only remove seventy or eighty percent of the water, and the remaining water depends on natural volatilization, but due to the relatively long time of volatilization, there will be some water marks, which affects the sight of driving.
- Do you have to bask in the sun on the car after the film?
Whether you're a new car or an old car, or you're basking in the sun behind a film, natural volatilization or drying doesn't solve the problem of remaining moisture very well, and even bubbles and other problems will occur. Therefore, it is a good choice to get some sun exposure for a few days after applying the film.
- To what extent can you get sunburned?
Normally, the water vapor between the film and the glass will evaporate after a week in the sun, but if there are still some "stubborn" bubbles that still do not disappear after a few weeks, then you need to consult the store and solve it manually.
- Are there any other precautions after applying the film?
Do not open the window within one week after the film is applied to avoid the displacement of the curling edge of the film;
Do not attach the pendant to the window within one month after the film;
Nar tips for about half a month after the film, do not wash the vehicle, and avoid using high-pressure impact.
