After the car film is not all right, there are many things that must be done and can not be done, these things seem very simple, it is a small thing, but the impact on the car film is very important, and even there will be a lot of car film equivalent to the state of white sticker, today Xiaobian is mainly to tell you what these things are, to avoid it as much as possible, so that our film can be used for a longer time!
The first thing:
After the car is filmed, the glass will not fall within a week. Generally speaking, it takes 5-7 days for the car film to be firmly attached to the car window. During this period, try not to lift or drop the glass as much as possible to avoid the displacement of the car film that has not been fully bonded. After buying a car, car lovers who should attach car film should pay attention to these things.
The second thing:
After the car film, do not wipe it within a week, and the newly applied car film is easy to appear fogging, which is a normal phenomenon in the process of drying the film. Generally, it takes about a week to half a month for this kind of development to occur, and it is normal to wait for it to disappear slowly, and it must not be wiped. After buying a car, car lovers who should attach car film should pay attention to these things.
The third thing:
After the car is applied, do not scratch it with a sharp, coarse and hard sharp object. Because if the owner does not pay attention, the car film will be scraped with a sharp and hard sharp weapon after scratching, which will greatly reduce the light transmittance of the car film. It is recommended to wipe the film surface with a soft cloth such as a wet towel as much as possible when washing the car, and avoid using corrosive chemical solvents to wipe the film surface of the car film.
If there are a lot of bubbles after the film, then what are the causes of it?
1. The quality of the car film is not up to standard.
Although the car film industry is not big, but the water is very deep, a small number of stores will be shoddy, to the inferior car film labeled with a brand, fooling consumers, some poor quality car film, after exposure to the sun, chemical reaction, blistering can not be prevented.
2. Problems in the installation of film process.
When a small number of shops are busy, they may ask some apprentices to put on the car film for you, because the process may not be in place, which may induce the occurrence of bubbles; If the construction site is not clean, sand and dust adhere to the surface of the body, which may also lead to the formation of bubbles.
