Many car owners said that when the car clothing is pasted, there is no problem on the surface, but after using it for a period of time, there are many problems with the invisible car clothing, and they need to go back to the store to re-process, and they have done a lot of useless work in vain. So, how can we avoid such problems?
In fact, it is very simple, pay attention to the following points when accepting the invisible car coat, what do we need to pay attention to, and then the editor will take you to understand.
1. No creases are allowed: the invisible car clothing is made of plastic scrapers, as long as the construction technology is not very bad, ordinary creases are still difficult to appear, but it is still necessary to see if the film is flat after testing, if it is flat, then it is OK.
2. No scratches are allowed: the invisible car coat is to cover up the scratches and avoid scratches for the main purpose, and if the invisible car coat shows scratches, it does not meet the acceptance standards, and the scratch problem can be paid attention to after the construction is completed.
3. No bubbles are allowed: the area of the car is very large, so if there is bubble residue that will cause it to be difficult to remove, it is generally detected and treated in time, and accepted on site to ensure that there is a bubble problem on the surface of the "membrane".
4. The appearance of dirty spots: more than 3 dirty spots are not allowed in a certain diameter range, and the car should be carefully washed before pasting the invisible car clothing. The environment of the construction shop must be dusted to reduce the appearance of dirty spots.
5. Reduce blisters: no more than 3 blisters and no more than 5 small blisters within a certain diameter range. Unlike bubbles, blisters can disappear, but not too much and not too noticeable, otherwise, it may leave traces.
6. The edging must be comprehensive: the distance between the edging and the edge is controlled within the range, the appropriate edging distance can ensure that the film is firm, too long or too short is not good, whether the edging is comprehensive or easy to judge, can be seen on some edges, such as around the headlights.
As long as the owners and friends pay attention to the above points when accepting the invisible car clothing, check in real time after the film is pasted in the store, whether there are the above problems, and deal with them in a timely manner.
