What if the paint protection film is torn off and the glue remains on the paintwork? Not to mention if the membrane is bad, then what to do in this situation. In general, depending on the amount or severity of glue remaining, the treatment can be carried out as follows.
- A small amount of gelatin
Tear off part of the paint protection film (or single-sided mask), no glue is of course the best, if there is a large amount of glue, offset freckles, the area is not large. The general treatment method is as follows:
1. Adhesive remover (professional development store)
First, the glue dots (offset printing) are simply heated with an electric baking gun, and then the degumming agent is sprayed; Rest for 1ー2 minutes, wipe with a towel, if it is not too clean, wrap the spatula in a towel, and when everything is clean, do a simple wash.
2. Wipe with alcohol (at home/personally)
Use a towel dipped in alcohol, wipe the offset in a clockwise circular motion, and after wiping, rinse the environment with clean water. Note: This teaching method is only suitable for the kind that has very little residual glue and a few traditional offset printing.
3. Tar cleaning agent (or asphalt cleaning agent)
One of the ways to do this is: with an asphalt cleaner (more widely used in car repair shops), spray on the reserved area, for degumming, then sprinkle flour, remove asphalt cleaner (corrosive): then polish ...
Please note: This method is not recommended, regardless of the amount of gel. Because, asphalt cleaning agent (or asphalt as a cleaning agent) is corrosive and strong, sprayed on plastic parts, can dissolve the plastic and deform, bite the black car plastic parts into white, toxic, please avoid problem children, choose to use carefully!
- A large amount of glue
If you tear off the paint protection film, the glue is still very serious and it is usually difficult to remove. It's not as simple as what you read or think online, leave it to a professional store. One person has to process for 2 days, with 5~8 bottles of gum remover.
Processing Steps:
pouring hot water to heat the residual glue (glue);
Spray amateur adhesive remover and let stand for 1~2 minutes; (Note: There are many kinds of adhesive removers, and some adhesive removers can only be applied in metal, glass, and ceramics; The acquiesced automotive film adhesive remover on the market is a glass film adhesive remover, which will not erode the glass, but the paint surface is difficult to say, so it is necessary to pay extra attention to it)
Use a towel pad spatula to shovel slowly little by little, which is very time-consuming; The difficulty depends on the glue, and some glues are very hard and sticky, so the difficulty is particularly great, and only those who have actually experienced it know the pain.
- How much does paint protection film glue treatment (degumming) cost?
So, after the paint protection film is torn off, it is left glue for treatment, or degumming, how much does it generally cost? In fact, the price depends on the area of the glue to be retained, the length of time and the difficulty of removing the glue, if the whole car is glue, generally around 1500 to 2000 years, if the area is small, one or two hundred can also solve this problem.
If you tell the store, after I tear the film, I want to paste a good paint protection film in the store, then the tearing film may be free, choose Dingxin Films PPF paint protection film.
