After the car film, the film master will recommend that you first dry it in the sun after pasting, and then go to drive, open the window, etc., after two or three days, so why do you want to operate it this way, and I will analyze it for you today?
In order to make the film and glass more bonded, although the scraper method will be used to remove water during construction, the water scraped out can only remove seventy or eighty percent of the water at most, and the remaining water depends on natural volatilization, but due to the relatively long time of volatilization, there will be some water marks, which will affect the sight of driving.
- Do you have to bask in the sun on the car after the film?
Whether you are a new car or an old car, it is best to bask in the sun behind the membrane, natural volatilization or drying does not solve the problem of remaining moisture very well, and even problems such as bubbles will appear. Therefore, it is a good choice to get some sun exposure for a few days after applying the film.
- To what extent can you get sunburned?
Under normal circumstances, the water vapor between the film and the glass will evaporate after a week in the sun, but if there are still some "stubborn" bubbles that still do not disappear after a few weeks, then you need to consult a film shop to solve the problem.
- Are there any other precautions after applying the film?
Do not open the window within a week after the film is applied to avoid the displacement of the curling edge of the film;
Do not attach the pendant to the window within one month after the film;
Nar reminds to apply the film for about half a month, do not wash the vehicle, and avoid using high-pressure impact.
