(1) In the early stage after the completion of construction, the adhesion is low, do not touch the edge part hard, and the adhesion reaches the maximum after 48h.
(2) There will be the possibility of bubbles or blisters in the future, which is a normal phenomenon, if there is a problem, consult or go to the store to deal with it, and the water will be completely dried after two to four weeks.
(3) Cleaning the vehicle is carried out after the film is dried, and it is not recommended to spray directly at the joint between the film and the paint with a water gun.
(4) Avoid sticking to the surface of the film with adhesives and the like.
(5) Avoid using cleaning tools that are easy to cause damage to the membrane surface. Do not apply brushes, abrasives, or sponges with abrasives to clean the membrane surface.
(6) If it is necessary to remove the body film, it will be operated by a professional technician.
(7) If the membrane is dirty, it can be cleaned directly, and some parts that are difficult to remove should be removed with volcanic mud sanding, do not use a polishing machine.
