Paint protection film has about 10 years of use, paint protection film is a new type of high-performance environmental protection film, is widely used in the car beauty maintenance industry, is a common name for transparent paint protective film.
It has super toughness, can isolate the car paint from the air, protect the paint for a long time, and isolate the car paint from the air after pasting the paint protection film, prevent acid rain, oxidation, resist possible scratches, and protect the paint surface of the car for a long time.
Maintenance is an important means of extending the life cycle of a product, and the same is true for paint protection film.
After pasting the invisible car coat, separated by a layer of film, the maintenance foundation of the car paint does not need to be done, however, the maintenance of the paint protection film is required.
So, how to maintain the paint protection film, the following is to introduce you to the three common maintenance methods/methods on the market!
1. Cleaning (car washing)
When the invisible livery is attached, some dust, dirt, and corrosive substances will fall onto the surface of the invisible livery and adhere to it.
Car washing can clean the dirt, stains, and some dirt or erosion on the surface of the invisible car coat film, which is the most common and most frequently used maintenance method and method of invisible car coating. In this case, do not wash the car except for the first week after the film is applied.
2. The car clothing maintenance wax
The use of car clothing maintenance wax is the second common way to maintain car clothing, which is a solid paste product similar to waxing, and the construction is not much different from waxing, except that it acts on the car film instead of the car paint.
This maintenance method can improve the saturation and brightness of the invisible car coat in a short time, and the effect is very good. However, it should be noted that this maintenance method has high requirements for solid paste products, and if the product quality is not good, it will further corrode the coating and accelerate the aging of the coating.
3. Maintenance liquid
In addition to the above two maintenance methods, the professional paint protection film maintenance program of the paint protection film brand can also realize the maintenance of the paint protection film.
Under normal circumstances, a small maintenance (waxing) is carried out every 3-6 months, and a major maintenance (maintenance liquid) is carried out every 1 year.
