It depends on the situation, you should carefully inspect the edge of the film, if there is nowarping, no displacement, and no bubbles, then it's okay if there is, you should contactthe store of the film as soon as possible, and then go over to re-construct and repair it.
Of course, the situation of quick-drying type membranes and ordinary types ofmembranes is also different.

There are two types of car wraps, the first is the quick-drying type, and the second is theordinary type.

First, quick-drying type:
There are relatively few films of this type, such as dragon film, 3M, Weigu, and Quantumthere is no quick-drying type, Johnson & Johnson crystal is quick-drying, and the wholeMeiji system is quick-drying (Meiji still understands)

Although they are both quick-drying, there are slight differences:
Johnson & Johnson crystals dry quickly, you need to wait a day:
Meiji's whole system is quick-drying, and the window can be opened in 3 hours (but it isrecommended to wait a lot, in case it is broken, it will be troublesome).

The second type, the ordinary type:
Ordinary car film, different brands have different construction processes, and there aresome differences in time:
Weigu: generally 2-4 weeks in summer, 4-8 weeks in autumn and winter, depending on theweather, the time is shorter if the weather is good, and the time is longer if the weather isbad;
Dragon Film/3M/Quantum: In good weather, after 3 days, it will take a week in badweather or winter;

Precautions after the new car is applied
1. Do not start the defogging heating wire of the rear window within 30 days of the film, asthe heat is easy to cause film deformation;
2. lf the edge of the film is blistered and degummed, it should be repaired at theconstruction point within 24 hours;
3. Within 30 days, do not adsorb suction cup items on the membrane, such as: GPS suctioncup base, plush jewelry with suction cups, etc.;
4. Do not stick the sticky label directly on the film, if you have to stick it, you can useelectrostatic sticker.Electrostatic adsorptionaThere is no effect on the membrane;
5. After the film, if there is water mist between the film and the glass, it is normal, don'tworry too much, it will dry naturally in 1-2 months;
6. After the front windshield is pasted,Front windshield defoggingaDo not blow againstthe front windshield for a week;
7. After cleaning the inside of the qlass, you can use a clean, soft and lint-free microfibertowel to gently wipe it, pay attention to the sand and other dirt in the towel, and avoidsharp things scratching the membrane;
8. Avoid hard objects touching the film to avoid scratches;