The problem of falling off the glue after the invisible car clothing is torn off the film, which shows that it is a problem of product quality, and it is the inferior glue used to paste the invisible car clothing. Below, let's briefly share it with all car owners!
1. Invisible car coating glue process
To put it simply, the adhesive process of the invisible car clothing is the same principle as spray paint, which must be sprayed with primer and then sprayed with color paint. The adhesive is the same, Japan adhesive is first scanned with an electron beam, and then the adhesive is applied to the membrane, and then combined with the surface of the membrane, usually using Japan invisible car clothing adhesive (adhesive layer) is acrylic glue.
2. What are the better glues on the market at present?
First of all, we must correctly understand this aspect, there is no one best, only better, the best glue at this stage is also the United States and Japan, which must be matched with different raw materials, which is indeed very complicated. Needless to say, domestic PVC, without this technology, glue loss is very common.
3. How to judge the quality of invisible car coating glue
When judging, introduce a little trick, that is, the invisible car clothing can be stretched with two rubber surfaces, with a thumb to resist, so that there is a sharp rubber surface, and then use the pointed surface to quickly stick to the flat surface, can reach more than 50 times without glue is a good product, PVC and TPH 5 times to stick to the glue must be off.
