In recent years, with the progress of science and technology, the automobile industry has developed rapidly, and the car film has become a trend among the car owners.
Because of the growth of the car film market in recent years, many car owners can not distinguish the advantages and disadvantages of the car film, pasted to the inferior car solar film, compared to many friends complained that the car sun film is blistered, and I don't know how to solve it, so let me introduce it to you today!
Car film foaming is divided into the following aspects:
1. Small and few bubbles: This situation can be solved, find a thin needle to break the traditional bubbles, and then flatten and paste.
2. Some larger bubbles: In this case, wrap the bank card in a soft cloth, gently scrape the foam, scrape it a few times, and then gently roll it to the edge, if the bubbles on the edge of the glass are in the same way.
3. If the number of bubbles is large, in this case, I suggests that you can tear off this film and paste a new one, because it will affect the driver's line of sight and there are hidden dangers.
4. The solar film is covered with hard substances such as sand, and it should be solved by a special film technician.
5. There are special circumstances, blistering affects the line of sight, but we have not changed, you can try to tear the blister on one side lightly on the serious side, and then slowly stick and scrape according to the normal process, and replace it as soon as possible.
If it is a high-quality car solar film, in the case of car film technology, it will not blister, if it is still blistered, then you are sticking mostly inferior car solar film, which is torn off, and this kind of film is currently worse than not sticking.
It not only affects the driving eyesight, so that the road cannot be seen outside the car, but also releases toxic benzene, formaldehyde and other gases, which are harmful to the human body.
